Bending fixture - List of Manufacturers, Suppliers, Companies and Products

Bending fixture Product List

1～6 item / All 6 items

Displayed results
Cantilever Bending Jig 'CBJ-200N'

Cantilever Bending Jig 'CBJ-200N'

Efficient repeated measurements are possible! This is a load measurement attachment ideal for cantilever bending tests of cutlery, cotton swabs, toothbrushes, needles, and more.

The CBJ-200N is a compression testing attachment used in combination with Imada's force gauge (load measuring device) and measurement stand. The Imada force gauge, when combined with the attachment, enables various load measurements. 【Features of CBJ-200N】 - It is ideal for load measurements performed by gripping only one side, such as measuring the strength of spoons and chopsticks. - The support position and pressing position of the sample can be easily set according to the scale. - It allows for efficient sample setting under the same conditions, making it suitable for comparative testing and testing of multiple samples. ■ For Imada force gauges and measurement stands, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various load measurement videos using Imada products. ▼ Videos of various compression tests are also available at the URL below, so please take a look.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mini Bending Jig '2810 Series'

Mini Bending Jig '2810 Series'

4-point bending conversion kit available! Mini bending jig adjustable for spans from 5mm to 105mm.

The "2810 Series" is a stainless steel mini bending jig. It features a micrometer for adjusting the position of the test specimen and a positioning function that allows for the adjustment of the axis center. A four-point bending kit with adjustable span is also available. Although it is designed for testing electronic components, it can also be used for bending tests and deflection tests of other materials and components. 【Features】 ■ Accurate specimen mounting with a micrometer ■ Specimen stopper for optimal alignment ■ Complies with quasi-standard G69-0996 ■ 2kN capacity ■ Temperature range: -75°C to 300°C *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bending Jig "2810 Series"

Bending Jig "2810 Series"

A sturdy design that requires minimal maintenance! Complies with many standards such as ISO, ASTM, and DIN!

The "2810 Series" is a fixture that can perform various bending and fracture toughness adhesive tests, including the measurement of bending elastic modulus, bending strength, and bending yield strength. It is possible to change to a four-point bending setup with an optional conversion kit. It includes one upper loading pin with a diameter of 25mm and two lower loading pins with a diameter of 10mm. The deflection of the test specimen can be measured through crosshead displacement or, for more accurate measurements, by using a strain gauge extensometer. 【Features】 ■ Load capacity: 100kN (10,000kgf) ■ Four-point bending conversion kit (optional) ■ Complies with many standards such as ISO, ASTM, and DIN ■ Adjustable span distance to accommodate a wide range of specimen sizes ■ Freely rotating rollers *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
250kN bending jig

250kN bending jig

Maximum load capacity of 250 kN! Adjustable span distance compatible with a wide range of specimen sizes!

This product is a bending fixture capable of conducting various bending and fracture toughness bending tests, including the measurement of bending elastic modulus, bending strength, and bending yield strength. The easy-to-install three-point bending fixture can be converted to a four-point bending setup with an optional conversion kit. The fixture includes one upper pressure pad with a diameter of 100mm and two lower pressure pads with a diameter of 50mm, which can be adjusted to accommodate test specimens of various spans. 【Features】 ■ Maximum load capacity of 250kN ■ Complies with many standards including ISO, ASTM, and DIN ■ Adjustable span distance to accommodate a wide range of specimen sizes ■ Freely rotating rollers ■ Interchangeable rollers and diameters to accommodate various specimen types *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bending Jig "2810 Series"

Bending Jig "2810 Series"

The 3-point bending jig can be converted to a 4-point bending jig with an optional conversion kit!

The "2810 Series" is a bending fixture that can perform various bending tests, such as measuring bending elastic modulus, bending strength, and bending yield strength. The fixture includes one upper pressure pad with a diameter of 10mm and two lower pressure pads that can be adjusted to accommodate test specimens with various spans, available in diameters of 4mm or 10mm. The deflection of the test specimen can be measured directly at the center with greater accuracy using either crosshead displacement or a deflection gauge plunger, along with a strain gauge extensometer. 【Features】 ■ Load capacity of 5kN ■ Optional conversion kit for four-point bending ■ Complies with many standards such as ISO, ASTM, and DIN ■ Accommodates a wide range of specimen sizes with fully adjustable span distances ■ Specimen stopper capable of handling specimen widths up to 50mm ■ Deflection gauge plunger option available ■ Temperature range: -100 to +350℃ *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bending jig (for universal testing machine)

Bending jig (for universal testing machine)

This is a three-point bending test fixture for plastics.

This is a testing fixture used for three-point bending tests of plastic materials.

  • Analysis and prediction system
  • Analysis and prediction system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.